Field IG App - New Install

1. Log in with your email and password.

2. Tap “New installation.”

3. You will be prompted to identify your device. You can either scan the QR code or manually enter the device ID. Then, tap "Start Installation".

4. On the next screen, the app will ask if you would like to view technical diagrams. Select "Yes" or "No" based on your preference to proceed.

5. You will then see the  templates of similar tanks. Select the one that it’s correct. If needed, tap the yellow pencil icon on the right to edit the configuration. If the template is correct, tap "Next".

6. Verify that all connections are properly made, and that the sensor is connected to the correct ports.

7. After confirming the connections, make sure the option box is selected—it should display a yellow highlight on the right side of the channel. You may also add photos of the sensor connections to supplement the installation. Once complete, tap "Next".

8. Ensure the battery is connected, then tap the confirmation box in the top right corner, just like on the previous screen. After verifying, tap "Next".

9. Confirm that the scale settings match the connected sensors. You can edit the information by tapping the yellow pencil icon. Once verified, tap "Next".

10. Perform a test packet on the unit as guided by the app. When the test is complete, check the "Completed" box and tap "Next".

11. The final screen will display your readings. If everything appears correct, tap "Complete Installation".

12. Installation is complete! You should see the message "Device successfully installed" on your screen. Tap "Done" to return to the main menu.

And that’s how to complete a quick installation using the Field IG App.