Transcend - How to Install a DPW900 with a UTD22 Sensor

Then, go to "Start"

3. And, if not selected, select the "Asset" option.

4. Select the "Quick Add" option on the right side of the page and click "Tank".

5. Fill up all the Asset details and information.

Note: If you don't have a Site created, click on the "Add" button and fill up the information on the location of the tank.

6. When you scroll down to the "Tank Details" part, insert the ID Number and select the "Tank Type".

Note: Select Tank Dimensions (volumetrics), if you want to use a different unit than InsWC or %. For example: (kg, l, lbs, Gal US..).

7. After that, on the "Level Sensor" you will be needing to select "Digital UTD22-D.P. and by default, select channel 1 and the for the "Pressure Sensor" select "Digital UTD22-Pressure" and the channel 2.

8. When you are finished with the sensor part, you can select the Max Product Capacity of the tank, as this is by default in insWC, you will need to input the value in insWC and the Product that you have in the tank.

Note: If you previously selected the option for volumetrics, in this option, it will show you the value in whichever unit you selected.

9. To finalize the installation, make sure you select the Event Rules that you desire to be predefined . 

10. When everything is done, press the "Save & Close" button on the top right side of your page.