Unify - Settings Menu: PGT Templates

Previous Article: Unify - Settings Menu: Enable Asset Types by Distributor Account

NOTE: This feature requires the PGT to be enabled in the previous step.​

8 – In the SETTINGS MENU, in the  OPERATIONS tab, select the PGT TEMPLATE page.​

9 – Click on the button “NEW PGT TEMPLATE” on the top-right corner.

10 – A new pop-up window will open. Fill the details required.​

11 – In the field “SENSOR” the user can select a 3 options: 2.5 bar; 25 bar; 315 bar.​

11 – In the field “UNIT” the user can select a custom unit if necessary.​

12 – In the field “PGT FUNCTION”, the user can select 3 options: Level only; Pressure only; and Level & Pressure.​

13 – If one of the options “Level only” or “Level & Pressure” is selected, 2 additional fields will appear: “PRESSURE AT 0%”, and “PRESSURE AT 100%”. ​

14 – Set up the Level Thresholds for this PGT Template. ​

15 – Set up the Hysteresis value.​

16 – Click on “CREATE”.

17 – The screen will refresh and go back automatically to the Meter Templates Page and a message in color green stating “the PGT template was created successfully” will appear in the top-right corner.​

Next Article: Unify - Operations Menu: PGT Deployment