xFluid - How to Calibrate

Calibration is used to tie a specific monitor (based on serial number) to a specific product.  Anytime a new monitor is installed, or changed to a new product, a calibration must be performed.  If a monitor is moved to a new tank with the same product, a calibration is typically not necessary, but it is usually good to verify the levels after the move is complete.

1.First, after you Log In, press the "Admin" on the top right side of the page;

2. After that, click on "Devices";

3. When on the menu "Devices", use your search bar to find your device using the Serial Number;

4. Now that the device showed up, click on the "Tanks";

5. After clicking on the Tanks option, you will be able to see the tank that you want to calibrate, to do so, click on the pencil;

6. Now, click on the "Recalibrate" button;

7. When on the Recalibrate tab, change the values that you want to be different, then, press Recalibrate;

8. After this, your tank is now Recalibrated and you are finished.