xFluid - How to Activate a Device

1.First, after you Log In, press the "Admin" on the top right side of the page;

2. After that, click on "Devices";

3. When on the menu "Devices", use your search bar to find your device using the Serial Number;

4. Now that the device showed up, click on the pencil to insert the information;

5. Start by changing the "Distributor/Owner";

6. Then, change the status to "Provisioned" and press the "Update Device" on the bottom part of the page;

7. When you are back to the Device Overview, click on the Tanks that you want to edit;

8. After clicking on the Tanks option, you will be able to see the tank that you want to edit, to do so, click on the pencil;

9. Now, Insert the Name, the Location, the Product, the Tank Profile and Offset to 0.5 ins (It's always 0.5 ins with this sensor). 

(If you need to add a New Location, Product or Tank Profile, you can always do it by clicking on the pages for that);

Make sure as well to Add the Sensor mv Per Inch and the sensor Offset (inches)

(If its a FTM, ask the OAR as well, if not, leave it as it is. This is for HDP Sensors)

10. When you are finished, change the "Provision Status" to "Active" and then scroll down your page and click on the Update Tank button;

11. And you are done now. Your tank is now active. It will show you a message on the top of the page, confirming that the device has been successfully updated.