WESROC - Activating Port B on a UTM Monitor in Wesroc.net

This guide explains how to activate Port B (TX2) on a UTM monitor within Wesroc.net. Follow the steps below to configure and manage your transmitter settings.

Steps to Activate Port B/TX2

Step 1 – Access the Device Page

• Log in to your Wesroc.net account.
• Access the UTM monitor you want to configure.

Step 2 – Add a Transmitter

• On the device page, click the option “Add a Transmitter.”

• This will open the transmitter configuration form.

Step 3 – Edit the Transmitter Information

• Enter the required details for the transmitter:
  • Name – Assign a clear identifier for the transmitter.
  • Capacity – Specify the capacity value appropriate for your monitoring setup.
  • Sensor Type – Select the correct sensor type from the available options.

• Save your changes to create Port B. Make sure to activate the monitor for both ports to be activated.

Additional Notes

• In Wesroc.net, Port A is named TX1 and Port B is named TX2.

• You can switch between transmitters by clicking View TX1 or View TX2 (or delete TX2) on the device page.

  

• After activation, verify that TX2 is reporting correctly by checking the device status indicators.
• If data does not appear, refresh the page or recheck the transmitter configuration.

Verification

Once Port B (TX2) is activated:

• TX2 will appear as active in the device overview.
• Transmitter data will populate in the monitoring dashboard.
• Alerts and notifications tied to TX2 will function as configured.